MacDon Farm FD2 25'

Double tap to zoom

 

Features

FOLLOW

A Ground Following Dream.
MacDon's legendary ground-following ability continues with the FD2. MacDon's Active Float System gets coupled with up to 70%* more flex for a harvesting experience like never before. Flex-Float Technology® gets turned up with MacDon's optional ContourMax™ Contour Wheels. These wheels allow the header to follow the field's contours, leaving a consistent stubble height while cutting from 1 to 18 inches+ off the ground.

+2.5 cm (1”) / 45.7 cm (18”)

*Compared to previous model.

CUT

Cut Cleaner. Cut Faster. Cut More.
MacDon's ClearCut™ High-Speed Cutting System delivers just that; clean cutting at up to 30% faster speeds*. Helping you get there is MacDon's improved knife drive with more power and new knife section geometry with 25% more cutting surface. A smooth close shave comes from two unique ClearCut Knife Guards; choose between Pointed Knife Guards or PlugFree™ Knife Guards that resist plugging even in the nastiest conditions.

FEED

High Volume Heads-First Feeding.
The FD2's all-new frame features an ultra-deep deck with 50 inch deep drapers and is now available in 30 to 50 foot configurations. The FD2 delivers up to 20%* more capacity of smooth heads-first feeding in the tallest bushiest crops it can get its reel fingers on. No matter what type of combine you mount it to, the FeedMax™ Crop Feeding System optimizes performance. Along with active crop flow, patented reel movement, and new ShatterGuard reel positioning, the FD2 is ready for action+.

+127 cm (50”), 9.1 m (30’) to 15.2 m (50’)

*Compared to previous model.

EASE

Purposefully Designed to Make Harvest Easy.
We all know harvest time is go time, and with the FD2, you won't waste time messing around. The FD2 lets you get the job done without the struggle: easy set-up, easy operation, easy upgrades. From the quick set-up of the EasyMove™ Transport to seamless combine integration, the FD2 is always ready for action!

MORE

Get Ready for More.
The FD2 FlexDraper® is the evolution of the ground following innovation MacDon first brought to market almost 20 years ago. Like we did then, we listen to and work with you, the farmer, in the most challenging real-world conditions. What does that mean for you? More. More sizes, more durability, more harvesting innovations. So, in case you're not convinced yet, here are a few more reasons why the FD2 is the right investment for your operation!

Specifications

FD2 FlexDraper® Specifications

Size* 7.6 M (25')
Weight** Single Knife Drive
Without FM200
2276 kg (5016 lb)
Weight** Double Knife Drive
Without FM200
-
Weight ** Double Knife Drive With Triple Reel
Without FM200
-
Knife: Type / Drive / Speed Single or Double knife / Hydraulic, MacDon design enclosed oil bath knife drive box(es) / 1200-1400/1500 spm, varies depending on header size
Guard Types Available ClearCut™ Pointed Guards - Forged and Double Heat Treated (DHT) with Forged, Single Bolt Adjustment Hold-Down; ClearCut™ PlugFree™ Short Guards - Forged and Double Heat Treated (DHT) with Forged, Dual Bolt Adjustment Hold-Down
Reel: Type / Drive / Speed / Fingers Pick-up reel, five bats, one-piece (single),two-piece (double) or three-piece (triple), flip-over design, cam-leading finger control / Hydraulic / 0 to 67 rpm (varies depending on combine model) / 290 mm (11.4") length, wear-resistant HD plastic, 102 mm (4") spacing
Conveyor: Type / Drive / Speed 1270 mm (50") deep, reversible, rubber skim-coated drapers, double V-guide with tracking, integral seal on leading edge / 0 to 209 m/min (0 to 687 ft/min)
Standard Features Fits most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, in-cab side draper speed control, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators
Field-Installed Options EasyMove™ Transport System, ContourMax™ Contour Wheels, Upper Cross Auger, VertiBlade™ Vertical Knife, stabilizer wheels, lateral tilt automatic header height control, Sunflower attachment
*Product Size Availability Varies By Market. **All Listed Weights Are Approximations And Will Vary Depending On Options Installed. Check With Your Dealer For Combine Ratings

FM200 Float Module Specifications

  Center Draper Feed Auger
Weight 1083 – 1171 kg (2387 – 2581 lb), varies by combine configuration  
Size 2000 mm (78.7") width 1630 mm (64.1") width
Type Hydraulic drive (reversible), self tracking rubber coated polyester fabric feed draper with rubber slats Mechanical drive (reversible), removable retracting fingers with bolt on flighting
Speed 107-122 m/min (350-400 ft/min), varies with combine brand 191 - 195 rpm, varies with combine brand
Header Floatation: Type/Vertical Range/Lateral Range (Tilt) 2 pairs of coil springs, independent adjustment, transport lock-out / 178 mm (7") / 4.8 degrees

FD2 Flex Range

  Standard (Factory) Range Increased Range**
FD225 102 mm [4"] up & 64 mm [2.5"] down 102 mm [4"] up & 102 mm [4"] down
FD230 165 mm [6.5"] up & 130 mm [5"] down 165 mm [6.5"] up & 165 mm [6.5"] down
FD235 205 mm [8"] up & 130 mm [5"] down 205 mm [8"] up & 205 mm [8"] down
FD240 Double Reel 205 mm [8"] up & 130 mm [5"] down 205 mm [8"] up & 205 mm [8"] down
FD241 205 mm [8"] up & 130 mm [5"] down 205 mm [8"] up & 205 mm [8"] down
FD240 Triple Reel 205 mm [8"] up & 205 mm [8"] down  
FD245 216 mm [8.5"] up & 216 mm [8.5"] down  
FD250 216 mm [8.5"] up & 216 mm [8.5"] down  
** The Flex Range Can Be Increased By Removing The Flex Limiter, However A Greater Reel To Cutter Bar Clearance Is Required. This Is A Customer Configuration; Instructions In Op Manual