Features
The 9400 Series comes with Danish Tines on 4" shank spacing. The 9600 Series has 6" shank spacing.
Specifications
Product Attributes | 9430FH-30 |
Approximate Weight | TBD |
Working Width | 30 ft. 6 in. (9.3 m) |
Transport Width | 17 ft. 4 in. (5.3 m) |
Transport Height | 13 ft. 0 in. (4.0 m) |
Number of Shanks | 91 |
Number of Shanks per Section | 26--39--26 |
Shank Type | Two-Piece Danish Tine |
Shank Size - Upper | 0.5 in. x 2.5 in. (12.7 x 63.5 mm) |
Shank Size - Lower | 0.375 in. x 2 in. (9.5 x 50.8 mm) |
Shank Spacing | 4 in. (102 mm), Split the Middle Pattern |
Spacing Between Shank Rows | 30 in. (762 mm) Minimum |
Sweeps | 0.3125 in. x 2.75 in. (7.9 x 69.9 mm) |
Under Frame Clearance | 26.5 in. (673 mm) |
Fore-to-Aft Depth | 165 in. (4.2 m) |
Frame | 3 in. x 4 in. x 0.25 in. (76.2 x 102 x 6.4 mm) |
Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
Frame Type | Truss Type with Wrapped Shank Tube Joints |
Transport Lift Axles | 4.5 in. (114 mm) Axle with Tower Lift System |
Walking Tandems | Standard with Maintenance Free Pivot Bushings |
Tire Size - Main Frame | (4) 320/70Rx15 Radial Tires |
Wheel Hubs - Main Frame | 8-Bolt |
Spindles - Main Frame | 2.25 in. (57.2 mm) Slip-In Spindles |
Tire Size - Wing Frame | (4) 280/70Rx15 Radial Tires |
Wheel Hubs - Wing Frame | 6-Bolt |
Spindles - Wing Frame | 2.25 in. (57.2 mm) Slip-In Spindles |
Hitch Type | Floating Hitch |
Hitch Category | Cat. IV Ball Hitch |
Machine Depth Control | Single Point, Front Mounted |
Hydraulics | 10 in. (254 mm) Stroke Cylinders |
Gauge Wheels - Main Frame | (2) 320/70Rx15 |
Gauge Wheels - Wing Frame | (2) 280/70Rx15 |
Safety Warning Lights & SMV Emblem | Standard |
Safety Chain Kit | Standard |
Powder Coat Paint, Blue Sapphire | Standard |
Rear Hitch with Hydraulic Hoses | Optional |
Cat. V Ball Hitch | N/A |
Spare Tire and Wheel | Optional |
Flexible Five Row Spike Harrow | Optional |
Four Row Coil Tine Harrow | Optional |
Three Row Spike and Reel | Optional |
Three Row Tine and Reel | Optional |
Three Row Spike and Double Flat Blade Reel | Optional |
Horsepower Requirements | 7 to 9 HP (5 to 7 kW) Per Foot |