Double tap to zoom

 

Features

  • 7” x 7” x 3/8” Heavy-Duty Tool Bar
  • Wide Parallel Linkage with Heavy-Duty Down Pressure Springs
  • 6” x 4” Gang Frames
  • 16” Penetrator Sweeps Standard on 30” Row Spacing
  • 24” Penetrator Sweeps Standard on 36” or 38” Row Spacing
  • Adjustable 20” Coulters
  • Fork Mounted Gauge Wheels with 4.6” x 16” Hard Rubber Tires
  • 14” Weeding Discs with Triple Lip Sealed Bearings
  • Cat. II Three-Point Hitch for 4 Through 8 Row Units
  • Cat. III Three-Point Hitch for 10 Through 16 Row Units
  • Yellow Powder Coat Paint
  • Safety Warning Lights

Specifications

Model 2016-30HCF-94
Approximate Weight - Without Weeding Disc 7,445 lbs. (3,377 kg)
Approximate Weight - With Weeding Disc 8,663 lbs. (3,929 kg)
Number of Rows 16
Row Spacing 30 in. (762 mm)
Transport Width 22 ft. 6 in. (6.9 m)
Transport Height 9 ft. 10 in. (3.0 m)
Frame 7 in. x 7 in. x 0.375 in. (178 x 178 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Three-Point Hitch Cat. III
Hitch Type Bolt-On Hitch Weldments
Gang Frame 6 in. x 4 in. x 0.25 in. (152 x 102 x 6.35 mm)
Gang Coulter 20 in. (508 mm) Adjustable Coulter
Gang Gauge Wheels Adjustable Fork Mounted
Gauge Wheel Tires 4.6 in. x 16 in. (117 x 406 mm) Hard Rubber
Gang Shank Sweeps 16 in. (406 mm) Penetrator
Depth of Operation Adjustable
Cut Angle 11, 15, 19 and 23 Degrees
Weeding Discs 14 in. (356 mm)
Weeding Disc Bearings Triple Lip Sealed Roller Bearings
Safety Warning Lights and SMV Emblem Standard
Powder Coat Paint, Yellow Standard
Penetrator Sweep (18 in.) Optional
Flat Sweep (24 in.) N/A
Lift Assist Wheel Assembly Optional
Ridgers (4 in. ) Optional
Ridgers (8 in.) Optional
Anhydrous Knife Assembly Optional
Liquid Fertilizer Spray Attachment Optional
Horsepower Requirements Not Published
Specifications subject to change with or without notice.