Double tap to zoom

 

Features

  • 7” x 7” x 3/8” Heavy-Duty Tool Bar
  • Wide Parallel Linkage with Heavy-Duty Down Pressure Springs
  • 6” x 4” Gang Frames
  • 16” Penetrator Sweeps Standard on 30” Row Spacing
  • 24” Penetrator Sweeps Standard on 36” or 38” Row Spacing
  • Adjustable 20” Coulters
  • Fork Mounted Gauge Wheels with 4.6” x 16” Hard Rubber Tires
  • 14” Weeding Discs with Triple Lip Sealed Bearings
  • Cat. II Three-Point Hitch for 4 Through 8 Row Units
  • Cat. III Three-Point Hitch for 10 Through 16 Row Units
  • Yellow Powder Coat Paint
  • Safety Warning Lights

Specifications

Model 2010-38HCF-94
Approximate Weight - Without Weeding Disc 5,340 lbs. (2,422 kg)
Approximate Weight - With Weeding Disc 6,200 lbs. (2,812 kg)
Number of Rows 10
Row Spacing 36 in. or 38 in. (914 or 965 mm)
Transport Width Not Published
Transport Height 9 ft. 10 in. (3.0 m)
Frame 7 in. x 7 in. x 0.375 in. (178 x 178 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Three-Point Hitch Cat. III
Hitch Type Bolt-On Hitch Weldments
Gang Frame 6 in. x 4 in. x 0.25 in. (152 x 102 x 6.35 mm)
Gang Coulter 20 in. (508 mm) Adjustable Coulter
Gang Gauge Wheels Adjustable Fork Mounted
Gauge Wheel Tires 4.6 in. x 16 in. (117 x 406 mm) Hard Rubber
Gang Shank Sweeps 24 in. (610 mm) Penetrator
Depth of Operation Adjustable
Cut Angle 11, 15, 19 and 23 Degrees
Weeding Discs 14 in. (356 mm)
Weeding Disc Bearings Triple Lip Sealed Roller Bearings
Safety Warning Lights and SMV Emblem Standard
Powder Coat Paint, Yellow Standard
Penetrator Sweep (18 in.) N/A
Flat Sweep (24 in.) Optional
Lift Assist Wheel Assembly Optional
Ridgers (4 in. ) Optional
Ridgers (8 in.) Optional
Anhydrous Knife Assembly Optional
Liquid Fertilizer Spray Attachment Optional
Horsepower Requirements Not Published
Specifications subject to change with or without notice.