Features
- 7” x 7” x 3/8” Heavy-Duty Tool Bar
- Wide Parallel Linkage with Heavy-Duty Down Pressure Springs
- 6” x 4” Gang Frames
- 16” Penetrator Sweeps Standard on 30” Row Spacing
- 24” Penetrator Sweeps Standard on 36” or 38” Row Spacing
- Adjustable 20” Coulters
- Fork Mounted Gauge Wheels with 4.6” x 16” Hard Rubber Tires
- 14” Weeding Discs with Triple Lip Sealed Bearings
- Cat. II Three-Point Hitch for 4 Through 8 Row Units
- Cat. III Three-Point Hitch for 10 Through 16 Row Units
- Yellow Powder Coat Paint
- Safety Warning Lights
Specifications
Model | 2008-40HCF-94 |
Approximate Weight - Without Weeding Disc | 4,330 lbs. (1,964 kg) |
Approximate Weight - With Weeding Disc | 5,035 lbs. (2,284 kg) |
Number of Rows | 8 |
Row Spacing | 38 in. or 40 in. (965 or 1,016 mm) |
Transport Width | 16 ft. 5 in. (5.0 m) |
Transport Height | 9 ft. 10 in. (3.0 m) |
Frame | 7 in. x 7 in. x 0.375 in. (178 x 178 x 9.5 mm) |
Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
Three-Point Hitch | Cat. II |
Hitch Type | Bolt-On Hitch Weldments |
Gang Frame | 6 in. x 4 in. x 0.25 in. (152 x 102 x 6.35 mm) |
Gang Coulter | 20 in. (508 mm) Adjustable Coulter |
Gang Gauge Wheels | Adjustable Fork Mounted |
Gauge Wheel Tires | 4.6 in. x 16 in. (117 x 406 mm) Hard Rubber |
Gang Shank Sweeps | 24 in. (610 mm) Penetrator |
Depth of Operation | Adjustable |
Cut Angle | 11, 15, 19 and 23 Degrees |
Weeding Discs | 14 in. (356 mm) |
Weeding Disc Bearings | Triple Lip Sealed Roller Bearings |
Safety Warning Lights and SMV Emblem | Standard |
Powder Coat Paint, Yellow | Standard |
Penetrator Sweep (18 in.) | N/A |
Flat Sweep (24 in.) | Optional |
Lift Assist Wheel Assembly | Optional |
Ridgers (4 in. ) | Optional |
Ridgers (8 in.) | Optional |
Anhydrous Knife Assembly | Optional |
Liquid Fertilizer Spray Attachment | Optional |
Horsepower Requirements | Not Published |
Specifications subject to change with or without notice. |