Farm King Farm 450

Double tap to zoom



The Triplex Finishing Mower is designed to be transported with ease. A cast clevis hitch is standard and a 2-5/16" ball hitch is optional for road transport. The 5-position hitch adjustment makes it easy to move, regardless of the hitch height of the tow vehicle. The decks are lifted into position by hydraulic cylinders and are automatically locked in place for transport. The decks are unlocked right from the tractor seat using a cable, or can be released using the optional hydraulic system.

Tapered roller bearings in the wheel hubs ensure long- term reliability without needing frequent lubrication. The standard front UHMW roller prevents scalping on uneven turf.

There is a 1-5/8" blade overlap on the 465, while all the other models have a 2-5/8" blade overlap. This overlap helps to prevent stripping, especially when turning.

A forgiving yoke design creates the ability to follow the terrain, yet maintain a seamless finish, available on models 565 and 665.

The model 765 has four wheels on each of the three decks. Models 665 and 565 have four wheels on the wing decks and two on the center deck. The 465 has three wheels on the wing decks and two on the center deck.


Model 450
Cutting width 134"(11.2')
Transportation width bottom/top 84"/90"
Transportation height / length 80"/13"
Recommended horsepower 35 hp
Wing flex* 30° up 17° down
Deck overlap 5"
Gear box rating at 540 RPM 66 hp - divider box / 30 hp - wing boxes
Hitch type Cast clevis - standard, 25/16" ball hitch - optional
Driveline main / wings Series 4-80° CV / series 2
Deck width / thickness 4' / 10 Ga.
Deck tires 8 (15" x 6" x 6")
Main frame tire 2 (27" x 10-1/2" x 15")
Blades per deck / overlap 3 blades / 1-5/8"
Blade tip speed 15,485 ft/min
Cutting height 1-1/2" to 4-1/2"
Mower drive system 2 belt B groove
Front roller 4" x 7" UHMW Poly
Weight 3347 lbs

* Not recommended for operation greater than 30°, actual measurement based on mower deck flex.