Odessa, WA
Call UsFarm King Series I Model 418
Rotary Cutter Series I Model 418
Overview:
These rotary cutters, available in two series, easily clear heavy weeds and thick rough and require minimal maintenance. Series I, with a 3-point hitch, is available in 48" or 60" widths. Series II is available in widths of 60", 72" and 84". Two available options include a trailing kit with hydraulic lift or a 3-point hitch.
Features
- The power take-off (PTO) shaft on the Series II 60" includes a shear pin to protect the gearbox in the event of an unforeseen obstacle.
- 3-point hitch models include a single solid rubber or laminated trailing wheel.
- The access panel on the deck makes it easy to replace the blades.
- The 72" and 84" rotary cutters are equipped with a slip clutch to prevent gearbox damage.
- An optional chain kit minimizes the possibility of flying debris.
STUMP JUMPER
A 24" stump-jumper is mounted above the blades to the gearbox. Standard on Series II, the stump-jumper allows the blade assembly to glide over uneven terrain.
Specifications
| Series | I |
| Model | 418 |
| Cutting width | 48" |
| Cutting height | 2" - 12" |
| Blade tip speed | 13,098 ft/min |
| Spring steel blades | 1/2" x 3" heat treated |
| Deck material | 11 gauge |
| Gearbox | Closed (540 RPM) |
| Gearbox rating | 40 hp |
| Tractor engine requirements | 20 - 55 hp |
| PTO shaft | Shear pin |
| 3-point hitch | Category I |
| Tire - 3-point | 15" laminated |
| Tire / wheels - trailing | N/A |
| Stump-jumper | N/A |
| Parking jack | N/A |
| Chain kit | Optional |
| Weight - 3-point | 448 lb |
| Weight - trailing | N/A |