Call Us
Stump Grinder 2628
Overview:
Economical and Efficient PTO and Hydraulic powered stump grinders make stump removal fast and easy. Operator easily controls the grinder from the comfort of the tractor or skid steer seat.
Features
- Cutting wheel design provides a smoother cutting action and higher productivity
- Durable carbide-tipped cutting teeth are economical and easy to replace
- Stabilizer bar provides solid footing during operation
- Maneuverable – goes anywhere a tractor or skid steer can; gets into tight places
- Easy to operate – hydraulic controls allow easy operation from the seat of the power unit using existing hydraulic controls
- Hardened bushings and grease zerks used at major pivot points for increased reliability and extended service life
- Standard pressure relief valve for precise control of cutting feed rate
- Rubber deflector helps control chips and debris during grinding
- Parking stand for easy storage
Specifications
| Model | 2628 |
| Hitch | Cat. I |
| Overall length | 75" |
| Drive system protection | Slip clutch |
| Gearbox rating / ratio | 60 hp / 1:1.5 |
| Cutting wheel construction | Welded 2 piece laminated steel |
| Cutting wheel thickness | 3/4" |
| Cutting wheel diameter | 26" |
| Cutting wheel speed @540 PTO RPM |
810 RPM 5,5151 ft/min |
| Number of teeth | 33 |
| Cutting teeth construction | Carbide steel bolt in |
| Cut height above ground | 18" |
| Cut depth below ground | 10" |
| Max. cut depth per pass | 5" |
| Max. horizontal cut | 28" |
| Swing arc | 45° |
| Min. power / flow required | 22 PTO hp |
| Max. power / flow | 50 PTO hp |
| Drive system | PTO / Series 5 |
| PTO speed | 540 RPM |
| Weight | 660 lbs |