Case IH LB334XL

Double tap to zoom

 

Features

High Density, High Capacity
Ready to build better, high-density bales? The new Case IH LB436 HD large square baler has advanced features such as patented two-speed gear box, robust compression system, ISOBUS Class 3 integrated automation and reliable TwinePro™ knotter system increase the efficiency of the baler and set standards in bale density and ground speed.

INNOVATIONS

Achieve High-Efficiency Hay

TWINEPRO

New for Model Year 2020
The new design allows for up to 30% increased knot strength. Bale density may be increased using the same twine or current bale density maintained using lower strength twine.

ACCUMULATORS

Automatic and Uniform

  • Fully automatic
  • Reduces loading time by up to 50%
  • Holds three to five bales
  • Dumps uniform, pickup-ready bales
  • Works on a variety of bale lengths and conditions

 

Available in vertical and horizontal stacking models

  • AC3108: standard horizontal three-bale accumulator for 3x3 bales
  • AC4108: standard horizontal three-bale accumulator for 4x3 bales
  • AC5150: horizontal five-bale accumulator for 4x3 bales
  • VS1206: vertical three-bale accumulator for 4x3 bales

 

FEEDRATE CONTROL

Advanced Baling Technology
Feedrate Control enables the baler to run at optimal performance by controlling​ the speed of the tractor. Using Feedrate Control, the baler controls the tractor’s forward speed through ISOBUS Class 3 commands, maintaining desired capacity by using a charge sensor. The system then calculates the best speed based on the information received from the sensors.

Charge Control
Charge Control automatically adjusts the tractor's speed to reach optimal capacity inside the baler. This results in a higher feedrate throughput by up to 9 percent overall. Available on LB334R, LB434R and LB434R XL rotor cutter configurations.

Slice Control
Slice Control automatically adjusts the tractor's speed based on bale slice thickness. This allows the operator to predetermine the number of slices per bale to create more consistency​​. Available on all configurations of LB4 models.

Specifications

Make Case IH Case IH Case IH
Model LB334XL Standard (2018-Present) LB334XL Packer Cutter (2018-Present) LB334XL Rotor Cutter (2018-Present)
Bale Size      
Bale width, in (mm) 31.5 (800) 31.5 (800) 31.5 (800)
Bale height, in (mm) 35.4 (900) 35.4 (900) 35.4 (900)
Bale length, maximum, in (mm) 108 (2743) std.; 118 (3000) opt. 108 (2743) std.; 118 (3000) opt. 108 (2743) std.; 118 (3000) opt.
Pickup      
Pickup working width, in (mm) 77.5 (1968) 77.5 (1968) 77.5 (1968)
Outer tine-to-tine width, in (mm) 70.2 (1782) 70.2 (1782) 70.9 (1800)
Number of tines 56 double (112) 56 double (112) 56 double (112)
Tine spacing, in (mm) 2.6 (66) 2.6 (66) 2.6 (66)
Number of tine bars or tine rows 4 4 4
Gauge wheel size Two 15x6.00-6 4PR; caster opt. Two 15x6.00-6 4PR; caster opt. Two 15x6.00-6 4PR; caster opt.
Cutter System      
Cutter knives No; see Packer Cutter or CropCutter 6 9 or 19 knives, 38 rotor teeth
Feeder      
Feeder Description 2 packer forks, 6 single tines 3 packer forks, 6 double tines Rotor width 31.5" (800 mm), "W" tine pattern
Stuffer Description Fork type with 4 tines Fork type with 6 tines Fork type with 4 tines
Plunger      
Plunger speed, Strokes/minute 48 48 48
Plunger stroke, in (mm) 28 (710) 28 (710) 28 (710)
Main Drive      
Drive protection Shearbolt, overrunning clutch & slip clutch Shearbolt, overrunning clutch & slip clutch Shearbolt, overrunning clutch & slip clutch
Knotters      
Knotter Type Double knot Double knot Double knot
Number of knotters 4 4 4
Twine ball storage, quantity 32 32 32
Controls, Indicators and Monitors      
Bale density control Monitor controlled; manual override std. Monitor controlled; manual override std. Monitor controlled; manual override std.
Bale weighing system Factory fitted option Factory fitted option Factory fitted option
Baler Monitor with screen (non-ISOBUS) AFS Pro 300 or Pro 700 for non-ISO tractor AFS Pro 300 or Pro 700 for non-ISO tractor AFS Pro 300 or Pro 700 for non-ISO tractor
ISOBUS compatibility ISOBUS Class 3 capability ISOBUS Class 3 capability ISOBUS Class 3 capability
Tires      
Tire size, Single axle 600/55-22.5 or 700/40-22.5 600/55-22.5 or 700/40-22.5 600/55-22.5 or 700/40-22.5
Tire size, Tandem Axle 500/50-17 or 550/45 R22.5 500/50-17 or 550/45 R22.5 500/50-17 or 620/50 R22.5
Baler Dimensions      
Length w/bale chute extended, in (mm) np np np
Length w/bale chute folded, in (mm) 325.2 (8259) 325.2 (8259) 327.4 (8315)
Baler width, in (mm) 94.4 to 102.5 (2398 to 2604) 94.4 to 102.5 (2398 to 2604) 94.4 to 102.5 (2398 to 2604)
Height, single axle, in (mm) 123.3 (3133) 123.3 (3133) 126.9 (3223)
Height, tandem axle, in (mm) 123.3 (3133) 123.3 (3133) 126.9 (3223)
Weight, empty, w/bale ejector & chute      
Weight, single axle, lbs (kg) np np np
Weight, tandem axle, lbs (kg) np np np
Tractor Requirement      
Tractor Power, hp (kW) 109 (81) 116 (87) 136 (101)
PTO Speed, rpm 1000 1000 1000
Number of remote hydraulic valves 2 3 3